Volume 4, No. 1, March, 2016
Home > Published Issues > 2016 > Volume 4, No. 1, March, 2016 >

Dip Coated Superhydrophobic and Anticorrosive Silica Coatings

V. G. Parale 1, D. B. Mahadik 2, V. D. Phadtare 3, A. A. Pisal 3, H. H. Park 2, and S. B. Wategaonkar 4
1. Rajarambapu Institute of Technology, Sakharale, Maharashtra, India
2. Department of Material Science & Engineering, Yonsei University, South Korea
3. Department of Physics, Shivaji University, Kolhapur, Maharashtra, India
4. Sanjay Ghodawat Polytechnic, Atigre, Maharashtra, India
Abstract: The present paper reports a simple and low cost method for the fabrication of superhydrophobic coating surface on different metal substrates via sol-gel dip coating method at room temperature. The prepared substrates are characterized by Field-emission scanning electron microscopy (FE-SEM), Atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), water contact angle (WCA) measurements. Sol-gel dip coated substrates showed high water contact angle with value about 161 ± 2° and low sliding angles for deposited metal substrate. A chemical aging test is carried to study anticorrosive properties of prepared coatings.
 
Keywords: Superhydrophobicity, dip coating, contact angle, anticorrosive.
.
Cite: V. G. Parale, D. B. Mahadik, V. D. Phadtare, A. A. Pisal, H. H. Park, S. B. Wategaonkar, "Dip Coated Superhydrophobic and Anticorrosive Silica Coatings," International Journal of Materials Science and Engineering, Vol. 4, No. 1, pp. 60-68, March 2016. doi: 10.17706/ijmse.2016.4.1.60-68

General Information

ISSN: 2315-4527 (Print)
Abbreviated Title: Int. J. Mater. Sci. Eng.
Editor-in-Chief: Prof. Emeritus Dato' Dr. Muhammad Yahaya
DOI: 10.17706/ijmse
Abstracting/ Indexing: Ulrich's Periodicals Directory, Google Scholar, Crossref
E-mail: ijmse@iap.org