Volume 4, No. 4, December 2016
Home > Published Issues > 2016 > Volume 4, No. 4, December 2016 >

An Approach Towards Machining of GFRP Using Alumina Based Cutting Tools

Mohit Mittal, Mahesh Kumar, Ranjeet Sharma
Department of Mechanical Engineering, BSAITM Faridabad
Abstract: Glass Fibre Reinforced Plastic (GFRP) Composite materials is a feasible alternative to engineering materials because of its first class properties such as higher fatigue limit, high stiffness to weight ratio, excellent design flexibility, and high strength to weight ratio [1]. Irrespective to all such properties, machining of glass fibre composite is still a major problem. To analyse the machining of GFRP, an attempt is made by using two different alumina cutting tool; namely a Ti[C, N] mixed alumina cutting tool (CC650) and a SiC whiskers alumina cutting tool (CC670). The performance of cutting tools was evaluated at different cutting speeds, at constant feed rate and depth of cut by measuring the surface roughness and flank wear. An attempt is also carried out to analyse the wear mechanism of cutting tool while machining of GFRP composite material.
 
Key words: Composite materials, alumina, cutting tools

Cite: Mohit Mittal, Mahesh Kumar, Ranjeet Sharma, "An Approach Towards Machining of GFRP Using Alumina Based Cutting Tools," International Journal of Materials Science and Engineering, Vol. 4, No. 4, pp. 185-191, December 2016. doi: 10.17706/ijmse.2016.4.4.185-191

General Information

ISSN: 2315-4527
Editor-in-Chief: Prof. Emeritus Dato' Dr. Muhammad Yahaya
DOI: 10.17706/ijmse
Abstracting/ Indexing: Ulrich's Periodicals Directory, Google Scholar, Crossref, Engineering & Technology Digital Library and Electronic Journals Digital Library
E-mail: ijmse@iap.org