Volume 4, No. 4, December 2016
Home > Published Issues > 2016 > Volume 4, No. 4, December 2016 >

Design and Finite Element Analysis of H13 Tool Steel Belleville Spring Washer

Anudeep. B, Uppendra. N, Suresh. B
Mechanial Engg Dept. RGMCET, Nandyal, AP, India
Abstract: Belleville springs consist of a coned disk, resembling a dinner plate without bottom, which has typical load deflection characteristics. Belleville springs versatility lies in the wide range of spring constants without changing the design. While the applications include disk brakes, clutches, shock-load absorbing bolted assembly, there may be a chance to enhance further applications. The main objective of the project is to design a Belleville spring with the mathematical approach, and modeling them using CatiaV5R20 software. Thereafter, Ansys14.5 software is employed in the static structural analysis of these springs by loading them axially. The safe design is obtained by followed design procedure and also simulation results compared with existing analytical results. With the advent of Belleville Springs, there is a chance to open the door of new spring technologies replacing conventional ones.
 
Key words: Belleville springs, Von-Mises stress, deformation, CatiaV5R20 and Ansys14.5.

Cite: Anudeep. B, Uppendra. N, Suresh. B, "Design and Finite Element Analysis of H13 Tool Steel Belleville Spring Washer," International Journal of Materials Science and Engineering, Vol. 4, No. 4, pp. 200-207, December 2016. doi: 10.17706/ijmse.2016.4.4.200-207

General Information

ISSN: 2315-4527
Editor-in-Chief: Prof. Emeritus Dato' Dr. Muhammad Yahaya
DOI: 10.17706/ijmse
Abstracting/ Indexing: Ulrich's Periodicals Directory, Google Scholar, Crossref, Engineering & Technology Digital Library and Electronic Journals Digital Library
E-mail: ijmse@iap.org