Assessment of EPP Material Form Helmet Liner
Tso-Liang Teng1, Cho-Chung Liang2, Jun-Xiang Lee2
1.Department of Mechanical Engineering, Hsiu-Ping University of Science and Technology, Taichung, Taiwan
2.Department of Mechanical and Automation Engineering, Da-Yeh University, Changhua, Taiwan.
2.Department of Mechanical and Automation Engineering, Da-Yeh University, Changhua, Taiwan.
Abstract: Studies have shown that bicyclers wearing helmets exhibit a significantly lower rate of sustaining head trauma than those not wearing helmets do, confirming the protection effectiveness of helmets. The shapes and material characteristics of liner play a crucial role in buffer performance. Many foam materials exist for liner. Selecting liner materials that are high in impact absorption capacity, light in weight, and environmentally friendly is essential to designing bicycle helmets. Studies have shown that bicyclers wearing helmets exhibit a significantly lower rate of sustaining head trauma than those not wearing helmets do, confirming the protection effectiveness of helmets. This study established and analyzed impact test models in LS-DYNA according to the helmet standards of EN 1078: 2006, CPSC: 16 CFR Part 1203, and SNELL B95. Currently, most bicycle helmets in the market feature expanded polystyrene (EPS) liner. To enhance the impact absorption performance of helmets, this study adopted a new liner materials-expanded polypropylene (EPP). The impact absorption performance of the helmet models employed in this study was analyzed and compared to evaluate the applicability of the new liner materials in bicycle helmets.
Key words: Helmet, liner, foam, expanded polypropylene, impact.
Cite: Tso-Liang Teng, Cho-Chung Liang, Jun-Xiang Lee, "Assessment of EPP Material Form Helmet Liner," International Journal of Materials Science and Engineering, Vol. 7, No. 3, pp. 59-66, September 2019. doi: 10.17706/ijmse.2019.7.3.59-66
Key words: Helmet, liner, foam, expanded polypropylene, impact.
Cite: Tso-Liang Teng, Cho-Chung Liang, Jun-Xiang Lee, "Assessment of EPP Material Form Helmet Liner," International Journal of Materials Science and Engineering, Vol. 7, No. 3, pp. 59-66, September 2019. doi: 10.17706/ijmse.2019.7.3.59-66
General Information
ISSN: 2315-4527 (Print)
Abbreviated Title: Int. J. Mater. Sci. Eng.
Editor-in-Chief: Prof. Emeritus Dato' Dr. Muhammad Yahaya
DOI: 10.17706/ijmse
Abstracting/ Indexing: Ulrich's Periodicals Directory, Google Scholar, Crossref
E-mail: ijmse@iap.org
What's New
-
Oct 29, 2022 News!
-
May 26, 2022 News!
The dois of the papers published in Volume 10, Number 2 have all been activated by Crossref.
-
May 26, 2022 News!
-
Feb 17, 2022 News!
-
Nov 08, 2021 News!
- Read more>>