Volume 8, No. 3, September 2020
Home > Published Issues > 2020 > Volume 8, No. 3, September 2020 >

Review of Carbon Fiber Composite Grid with Manufacturing and Design Concepts for Seismic Resistance

H Y Jeon
Department of Chemical Engineering, Inha University, Incheon, South Korea.
Abstract: To fabricate the carbon fiber composite grid for seismic performance reinforcement, carbon fiber composite yarn with appropriate stiffness and ductility was fabricated and the optimum structure of the grid was designed and tested. Composite fiber of carbon fiber/aramid fiber/high strength polyester fiber was fabricated by double covering process, and the strength was increased by about 0.5% compared with carbon fiber which is matrix material. The TPU (thermoplastic polyurethane) extrusion coating method was more suitable for the carbon fiber composite yarn than urethane impregnation for the coating process. Creep properties of hybrid grid fabric of carbon fiber composite yarn during a simulated seismic event were evaluated using the SIM creep test method.

Key words: Carbon fiber composite grid, seismic performance, double covering, SIM creep test method.

Cite: H Y Jeon, "Review of Carbon Fiber Composite Grid with Manufacturing and Design Concepts for Seismic Resistance," International Journal of Materials Science and Engineering, Vol. 8, No. 3, pp. 74-80, September 2020. doi: 10.17706/ijmse.2020.8.3.74-80.

Copyright © 2020 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).


General Information

ISSN: 2315-4527 (Print)
Abbreviated Title: Int. J. Mater. Sci. Eng.
Editor-in-Chief: Prof. Emeritus Dato' Dr. Muhammad Yahaya
DOI: 10.17706/ijmse
Abstracting/ Indexing: Ulrich's Periodicals Directory, Google Scholar, Crossref
E-mail: ijmse@iap.org