A Study on Proportional Topology Optimization for Nonlinearities Material with Cyclic Load
Suphanut Kongwat1, Hiroshi Hasegawa2
1.Department of Functional Control Systems, Shibaura Institute of Technology, Saitama, Japan.
2.Department of Machinery and Control Systems, Shibaura Institute of Technology, Saitama, Japan.
2.Department of Machinery and Control Systems, Shibaura Institute of Technology, Saitama, Japan.
Abstract: This research proposes a proportional technique for updating an element density value for the topology optimization process. Fully stress design criterion for the topology optimization was combined with being one factor into the proportional function for updating the density value. An internal energy density was focused on the maximization problem and defined to the objective function with stress constraint. The cyclic load which the load value is not constant and vary by the time during the analysis process was applied to the structure that becomes dynamic analysis. For material property, the characteristic of isotropic and kinematic hardening plasticity was considered for the relationship between stress and strain of the structure. Finally, numerical examples were investigated to acquire the final layout and compared to the optimum design which obtained from the linear material properties under the static load.
Key words: Cyclic load, nonlinear material, proportional technique, topology optimization.
Cite: Suphanut Kongwat, Hiroshi Hasegawa, "A Study on Proportional Topology Optimization for Nonlinearities Material with Cyclic Load," International Journal of Materials Science and Engineering, Vol. 8, No. 1, pp. 93-98, March 2020. doi: 10.17706/ijmse.2020.8.1.7-14
Key words: Cyclic load, nonlinear material, proportional technique, topology optimization.
Cite: Suphanut Kongwat, Hiroshi Hasegawa, "A Study on Proportional Topology Optimization for Nonlinearities Material with Cyclic Load," International Journal of Materials Science and Engineering, Vol. 8, No. 1, pp. 93-98, March 2020. doi: 10.17706/ijmse.2020.8.1.7-14
General Information
ISSN: 2315-4527 (Print)
Abbreviated Title: Int. J. Mater. Sci. Eng.
Editor-in-Chief: Prof. Emeritus Dato' Dr. Muhammad Yahaya
DOI: 10.17706/ijmse
Abstracting/ Indexing: Ulrich's Periodicals Directory, Google Scholar, Crossref
E-mail: ijmse@iap.org
What's New
-
Oct 29, 2022 News!
-
May 26, 2022 News!
The dois of the papers published in Volume 10, Number 2 have all been activated by Crossref.
-
May 26, 2022 News!
-
Feb 17, 2022 News!
-
Nov 08, 2021 News!
- Read more>>